Click on the
miniature tool for
more info.
Millanyangle
2000
cutter
INSTRUCTION BOOKLET
WATCH YOUR CLEARANCE
When milling with side of insert indicated
above, do not angle cutter past 50 Deg.,
and make sure that there is a Min. distance
of .660 between center of tool and side of
part to be milled.
When using tool set at "zero" degrees
use CPMT-431 insert only.
For SHOULDER MILLING &
COUNTER BORING position insert
like shown.
For UNDER CUTTING & BACK
BORING
rotate insert 90 Deg.